Browse By

Monthly Archives: January 2021

uccollabing

Reset Elastix Web Admin Password

Reset Elastix Web Admin Password Sometimes after the installation of Elastix on server you might try to login to Web using Admin credentials which may fail but however SSH will work. To reset Admin Web password, you need to log into the server via console ,

uccollabing

Recover Cisco Corrupt IOS Router Image

Recover Cisco Corrupt IOS Router Image Cisco Router IOS Image Corrupted? Are you facing this issue? If yes, then here is a way you can recover/restore corrupted router ios image. Assumptions – You have physical access to the Router or you can take console using HyperTerminal

uccollabing

Troubleshooting Extension Mobility

Troubleshooting Extension Mobility Recently we learned how to configure Extension Mobility, now lets troubleshoot EM issues. Issues :- When you click on Services, it says Host Not Found. Solution : – Check that the Cisco Tomcat service is running by choosing Cisco Unified Serviceability >

uccollabing

DRF Backup or Restore Failure CUCM or CUC

DRF Backup or Restore Failure CUCM or CUC You may at times receive an error “109-Unable to transfer the tar file over SFTP channel as currently configured SFTP server does not support output stream” while taking Backup or Restore in Cisco Unified Communication Manager or

uccollabing

Installing or Upgrading to UCCX 10.6.1 SU1?

Installing or Upgrading to UCCX 10.6.1 SU1? Are you trying to upgrade UCCX from X version to 10.6.1 SU1 or doing a Fresh Install of 10.6.1 SU1? If yes, then be cautious about the error you may receive while installing or upgrading the UCCX Subscriber.

uccollabing

Simulate PRI E1 T1 Calls

Simulate PRI E1 T1 Calls Don’t have a real PRI? Want to simulate E1/T1 PRI on your lab? If yes, then here is the solution. You need two routers, let’s say 2800 series router which has E1/T1 Card connected on each. One router would be

No Thumbnail

Inbound and Outbound calls not working in H323 Gateway

Inbound and Outbound calls not working in H323 Gateway I have come across a situation where am unable to make inbound/outbound calls. Here is the call flowPSTN—VG-H323—MPLS—CUCM This is debug of the actual failed incoming call *Aug 9 06:10:03.923: //357/CCB999A780A0/CCAPI/ccSetMediaclassIp2ipTags:media class tags set: NR 0,