Browse By

Monthly Archives: July 2019

uccollabing.com

Step by Step Lync Server 2013 Installation & Configuration

Step by Step Lync Server 2013 Installation & Configuration: Lync 2013 is a unified communications (UC) platform that integrates common channels of business communication and online meetings, including instant messaging (IM), presence, voice over IP (VoIP), voicemail, file transfers, video conferencing, web conferencing and email.

uccollabing.com

Configure Automated Attendant IVR on Asterisk

Configure Automated Attendant IVR on Asterisk Configure Automated Attendant or IVR (Interactive Voice Response) on Asterisk/FreePBX/Elastix to handle inbound calls to your organization. This can be achieved easily but it needs little planning like – What would be the Business Hours Greetings that caller would

uccollabing.com

Track Media Resource (Transcoder) Utilization via RTMT

Track Media Resource (Transcoder) Utilization via RTMT There are times when the configured DSP resources on the Voice Gateways are not sufficient to serve the sessions (over utilized) or there might be chances that the DSP resources are under utilized. To track how many sessions

uccollabing.com

Enable SSH on Vsphere ESXi?

Enable SSH on Vsphere ESXi If you are trying to access Vsphere ESXi via SSH and the SSH is not working, verify the following thing in order to enable SSH. Verify if SSH is enabled on Vsphere ESXi (using Console) Launch Vsphere ESXi Console Press

uccollabing.com

Configuring an External Billing Server on CUCM

Configuring an External Billing Server on CUCM Good Bye 2016 and Welcome 2017. May this new year bring joy, peace and happiness to you & your family. Today, we see how to Configure an External Billing Server on Cisco Unified Communications Manager. Overview The system can

uccollabing.com

Cisco Call Manager Express – SIP/SCCP Configuration

Cisco Call Manager Express – SIP/SCCP Configuration While testing further i had a thought of preparing a lab scenario where i have SCCP Phones and SIP Phones registered in the same CME and will initiate a call within the lab scenario. PS:- I have implemented

uccollabing.com

CUCM Asterisk SIP Settings (Basic)

CUCM Asterisk SIP Settings (Basic) In one of our post we have learned how to create Cisco Unified Communications Manager (CUCM) to Asterisk SIP Trunk. In case if you have not followed the link, you can refer to it. (https://www.uccollabing.com/2014/05/16/cucm-asterisk-trunk-integration/). I have received many comments