Block Incoming calls based on calling party number CUCM

4 thoughts on “Block Incoming calls based on calling party number CUCM”

  1. user7 says:

    I tried this setup, however the part about adding Translation Patterns with the “!” twice is not allowed. I would love to do this if anyone can provide more details.

    1. Administrator says:

      Hello,

      I believe that you might have added “!” pattern twice with same partition/null partition. The actual work is to add “!” with two different partition, i.e., Gateway_PRT and Filter_PRT. Let me know if you face any issues?

  2. mostapha zedan says:

    hi
    actually i have one quisetn is little difrrent is that i have three DN’s range all of them locally 1.X.X.X is used for loacl staff and 3.X.X.X used in Asstant and 2.X.X.X used for mangers all of them registerd in on cucm i want to have the seanrios is STaff can call each other and Asstant but it prenvent from call the manger and the Asstant can be able to call staff and mangers and the mangers can dial all how it this accomlpish over a CUCM

    1. Administrator says:

      Hi Mostapha,

      To achieve the above scenario, you need to play with Partition and CSS.

      Create 3 Partition and 3 CSS (Staff_PRT, Staff_CSS, Manager_PRT, Manager_CSS, Assistant_PRT, Assistant_CSS)
      1. In Staff_CSS > Assign Staff_PRT and Assistant_PRT
      2. In Manager_CSS > Assign Staff_PRT, Assistant_PRT and Manager_PRT
      3. In Assistant_CSS > Assign Staff_PRT and Manager_PRT
      4. Now in Manager’s IP Phone > Assign Manager_PRT and Manager_CSS
      5. Now in Staff’s IP Phone > Assign Staff_PRT and Staff_CSS
      6. Now in Assistant’s IP Phone > Assign Assistant_PRT and Assistant_CSS

      That’s all. Let me know if you are facing any issues.

Leave a Reply

Show Buttons
Hide Buttons